Interconnecting 2948G switch

Unanswered Question
Feb 29th, 2008
User Badges:

Hi,


we are trying to cascade cisco 2948G-GE-TX with cisco 3500XL series but the link was not getting up


pleae let me know what are may be the root cause for the above issues


regards,

Vinoth


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 02/29/2008 - 06:09
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Need a crossed cable perhaps.

vinoth.kumar Fri, 02/29/2008 - 06:14
User Badges:

But we are connecting through fibre cabble


since 3524XL-EN series a only GBIC port and on the other end 2948G has GBIC ethernet port


So let me know what may be the rootcause


Regards,

Vinoth

paolo bevilacqua Fri, 02/29/2008 - 06:20
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Sorry if it seems obvious, have you tried swapping the strands.

vinoth.kumar Fri, 02/29/2008 - 06:29
User Badges:

Can we go with connecting crosscable on the one of the port in both switch


can u help can i do the above connecting for this model 2948G with 3524XL




paolo bevilacqua Fri, 02/29/2008 - 08:53
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Basically, you connect fiber cable and swap it around until works. Another is using the cable to make a loopback in the port, hence proving cable and port are working.

Actions

This Discussion