DHCP Relay Over IPSEC VPN between a PIX and VPN Concentrator

Unanswered Question
Feb 29th, 2008
User Badges:

Dear all,


I am having problems getting DHCP relay working at a remote site

At the Main site i have a Windows 2003 DHCP Server behind a VPN Concentrator 3005

At the remote site i have a Cico PIX 501.


The VPN is workings correctly and can ping from both ends.


Unfortunately no matter what config i put into the Pix i can't get it to relay to the clients.


the config i have tried on the clients is..


dhcprelay server 192.168.1.1 outside

dhcprelay enable inside

dhcprelay setroute inside


and


dhcprelay server Outside_IP outside

dhcprelay enable inside

dhcprelay setroute inside


and also have included tried both with the following lines in the access lists


access-list inside_nat0_outbound permit ip Outside_IP 255.255.255.255 192.168.1.0 255.255.255.0

access-list outside_cryptomap_10 permit ip Outside_IP 255.255.255.255 192.168.1.0 255.255.255.0


Can anyone help?


Thanks


James


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
brettmilborrow Wed, 03/05/2008 - 14:28
User Badges:

Does the VPN tunnel come up? The one that uses the outside_cryptomap_10 access-list.

Actions

This Discussion