mdi\mid-x

tpacjer · ‎02-29-2008

how can i turn off mdi\mdi-x on a catos switch

massimiliano.serafino · ‎02-29-2008

Hi,

To enable or disable the automatic Media-Dependent Interface Crossover (MDIX) function, use the set port auto-mdix feature.

set port auto-mdix mod/port {enable | disable}

Reference: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/command/reference/set_m_pi.html#wp1045648

I hope this helps.

Best regards.

Massimiliano.

tpacjer · ‎02-29-2008

that command is not listed this is the config i have. i am trying to stop people from looping the switch and looping hubs is there a command for this config or features i can enable/disable to prevent this from occuring

WS-C6509 Software, Version NmpSW: 6.4(9)

NMP S/W compiled on Mar 10 2004, 17:31:52

System Bootstrap Version: 6.1(3)

Hardware Version: 2.0 Model: WS-C6509 Serial #: xxxxxxxxxxx

PS1 Module: WS-CAC-1300W Serial #: xxxxxxxxxxx

PS2 Module: WS-CAC-1300W Serial #: xxxxxxxxxxx

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP2-2GE xxxxxxxxxxx Hw : 2.2

Fw : 6.1(3)

Fw1: 6.1(3)

Sw : 6.4(9)

Sw1: 6.4(9)

WS-F6K-PFC2 xxxxxxxxxxx Hw : 1.4

2 48 WS-X6348-RJ-45 xxxxxxxxxxx Hw : 1.5

Fw : 5.4(2)

Sw : 6.4(9)

3 48 WS-X6348-RJ-45 xxxxxxxxxxx Hw : 1.5

Fw : 5.4(2)

Sw : 6.4(9)

4 48 WS-X6348-RJ-45 xxxxxxxxxxx Hw : 1.5

Fw : 5.4(2)

Sw : 6.4(9)

5 48 WS-X6348-RJ-45 xxxxxxxxxxx Hw : 1.5

Fw : 5.4(2)

Sw : 6.4(9)

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 131072K 64597K 66475K 32768K 12483K 20285K 512K 372K 140K