Nam Card

Unanswered Question
Feb 29th, 2008
User Badges:

Our Nam Card is not responsive- this is the error message in our switch log:

C6KPWR-SP-4-DISABLED: power to module in slot 3 set off (Module not responding to Keep Alive polling

I have tried a different slot, and get the same error message. Is the card bad?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ebreniz Thu, 03/06/2008 - 14:38
User Badges:
  • Silver, 250 points or more

These are the descriptions of the error messages:

PM_SCP-SP-1-LCP_FW_ERR: System resetting module [dec] to recover from error

This message appears when the firmware of the specified module detects an error. The system automatically resets the module to recover from the error.

OIR-SP-3-PWRCYCLE: Card in module [dec], is being power-cycled off

This message indicates that the module experiences a port Application-Specific Integrated Circuit (ASIC) error.

%C6KPWR-SP-4-DISABLED: power to module in slot [dec] set off

This message indicates that the module experiences a Port ASIC error.

For more information, refer to Cisco bug ID CSCej52641.

To resolve this problem, upgrade Cisco IOS Software to Release 12.2(17d)SXB11 or later.


This Discussion