I would like to redirect web traffic to/from a particular L2 switch port to a dedicated URL. I can successfully implement this on a 3750 switch with IOS version 12.2(44)SE. However, when I apply the same configuration to our 3560 (with IOS 12.2(25)SE2 and 12.2(44)SE, this cannot be done successfully. I have made a traffic capture and found that 3750 intercept the WEB request from the end user and then pretend the WEB server to reply a WEB move/redirect message to the client and hence user can be rediretecd to another URL. However, for 3560 it simply send a TCP reset to the client. Any recommendation for this problem?