03-02-2008 05:01 AM - edited 03-05-2019 09:29 PM
I have 2950-24 non-LRE switch.I have isolated the switch and powerd on.This is wat i found...
All LEDs were Green for a minute...Then Stat LED was Alternate Green /Amber for 2 sec(where all other LED was Amber)Then all LED went Amber except UTIL,which was green and restart after this sequence....Can you please tell me wat may b the cause?Is there any problem in Hardware?As i cant connect it to Pc'c to find any configuration fault... or is it some kind of bug.....
Please show some light on it....
Actually the above post is the continuation of "2950 blinks amber"
03-02-2008 05:40 AM
Hi,
To better understand your problem you need to connect to the switch thru console n capture all the boot process log and upload here. It will help the Pros to analyze the problem.
HTH
*aijaz*
03-02-2008 06:02 AM
Thank u aijaz,
But the switch reboot every 3 min....
How to capture the boot sequence if this is the case?
I can use console and Hyper terminal to enter switch configurations...later how to capture the boot sequence ?
lookin forward to c ur reply,
03-02-2008 08:13 AM
Hi Sakthi
If you have your laptop/PC connected to the console port of the switch with a hyper terminal window open, you should see the boot messages come up on the screen every time the switch reboots.
Just capture these messages while the switch is booting and post them here along with the output of show run if you can.
Best Regards,
Michael
03-02-2008 09:24 PM
Hi,
In the hyper terminal menu/ Transfer /Capture Text, select a new text file here/then click start...it will capture all the data till you stop it. Then you can upload the text file here.
HTH
*aijaz*
03-02-2008 11:10 PM
03-02-2008 11:31 PM
Hi,
AFAIK this is related to the hardware/data bus problem. You need to check with your vendor.
Lets also wait for experts advice..
BR
*aijaz*
03-02-2008 11:40 PM
Hi Aijaz,
How to analyse the captured report?and wat is AFAIK means?Can u tell me something abt this?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: