Thanks.

Why does it keep filling up the logs. Is it suppose to be doing this every 60 minutes and sending this message out?

Thanks

Yes it does it every 60 minutes

The reason you are seeing this is because you have setup your logging level to greater than 5..

I dont know of a way to stop this message being generated. It would have been great if the IOS too had something like the PIX/ASA where u can use a particular ID and disable the logging

Narayan

Thank you very much

Hi,

I hope this helps..

XXX(config)=logging trap errors/warnings....

BR

*aijaz*

Please explain. I don't understand.

Thanks

Hi,

The command "logging trap warning" only logs the warning level messages to syslog server this way you wont get the informational level messages, including the message which you are getting every 60 min.

You can configure the trap with various levels.

(config)#logging trap ?

<0-7> Logging severity level

alerts Immediate action needed (severity=1)

critical Critical conditions (severity=2)

debugging Debugging messages (severity=7)

emergencies System is unusable (severity=0)

errors Error conditions (severity=3)

informational Informational messages (severity=6)

notifications Normal but significant conditions (severity=5)

warnings Warning conditions (severity=4)

I hope this clarifies.... Please rate all helpful posts above.

BR

*aijaz*