Any command to see the 'BGP Synchronization' status on Cisco rtr..?

Unanswered Question
Mar 3rd, 2008

Hi All,

I have a 1720 rtr with IOS: 12.1(6)

It has EBGP peering with ISP rtr. No IBGP on the rtr.

***********************

BGP config:

router bgp 1111

bgp log-neighbor-changes

network 20.30.62.0 mask 255.255.255.0

network 15.5.104.0 mask 255.255.255.224

neighbor 23.23.3.17 remote-as 2222

neighbor 23.23.3.17 next-hop-self

neighbor 23.23.3.17 soft-econfiguration inbound

neighbor 23.23.3.17 route-map test out

****************************

How do I know, if BGP synchronization is enabled/desabled on this rtr. Is there any command whose o/p shows that..?

Thank you in advance

MS

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
PAUL TRIVINO Mon, 03/03/2008 - 10:17

If I'm not mistaken, if you don't see "no syncronization" in the BGP config, syncronization is ON.

Paul

Istvan_Rabai Mon, 03/03/2008 - 10:47

Hi MS,

BGP synchronization is off by default in Cisco IOS release 12.2(8)T and later.

If you don't see the "no synchronization" in the "show running-config" output, this means synchronization is set to the default value, which is "on" in your version of IOS, that is : enabled.

Cheers:

Istvan

Actions

This Discussion