03-03-2008 11:07 AM - edited 03-03-2019 08:56 PM
Hi what ip should I be using for icmp-echo.
ip sla 1
icmp-echo 4.2.2.2 source-interface FastEthernet1
timeout 1000
threshold 40
frequency 3
!
ip sla 2
icmp-echo 4.2.2.2 source-interface FastEthernet0
timeout 1000
threshold 40
frequency 3
03-03-2008 01:31 PM
The problem am having is I configured the router based on article id 99427
My problem is I will unplug wan0 the router is still working ok with wan1 but when I plug wan0 back again the router does not change back to it and if i do show ip route track table it shows it as down.
thank you
03-04-2008 10:38 AM
Anyone guys?
As soon as I use ip sla 1 my connection goes down, if i delete it, it comes back.
ip sla 1
icmp-echo 4.2.2.2 source-interface FastEthernet1
timeout 1000
threshold 40
frequency 3
thank you
03-05-2008 02:49 PM
Anyone can help please?
Anyone with a load balance/ fail over configuration that can help me?
Thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: