cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
374
Views
0
Helpful
2
Replies

offloading DHCP static mapping in 12.3(25)?

ocicat002
Level 1
Level 1

According to the following:

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t11/feature/guide/gtdhcpsm.html

...configuring static addresses via DHCP can be accomplished from a text file found on a tftp server as of IOS 12.3(11)T.

I'm running 12.3(25) on a 2621, but I don't see the form of the "origin" command described at the above link. The documentation above states that the syntax is:

origin { dhcp | aaa | ipcp | file <url> }

...yet, I only see the following options:

Router# conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router (config)# ip dhcp pool MYPOOL

Router (dhcp-config)# origin ?

aaa Subnet is from a AAA server

dhcp Subnet is from another DHCP server

ipcp Subnet is from IPCP subnet negotiation

Router(dhcp-config)#

The documentation states that this functionality was released with 12.3(11)T. Am I correct in assuming that it is not available in 12.3(25)?

2 Replies 2

ocicat002
Level 1
Level 1

I have since gotten this to work using a different IOS image.

Which raises a question: is there any information on what features/functionality can be found in any particular IOS image? Thanks for any insight shared.

Hello ,

software feature navigator tool

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

Search by image option lists the features supported in IOS image

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco