03-04-2008 02:53 AM - edited 03-05-2019 09:31 PM
I have one question about Port mirroring on C6509 with CatOS.
I wanna mirroring Mulit vlan with port mirroring command.
How do i configure it ?
I means all vlans I have.
I need ur help.
Regards,
Solved! Go to Solution.
03-04-2008 03:43 AM
Hi,
it should be quite straight forward.
Just need this command
set span "Source_VLAN_Number" "Destination_Port_Number"
I you have a range of VLANs, you can use this format:
set span 1-20 1/1
To verify your config, you can use:
show span
command.
HTH
Ivan
[please rate any helpful posts]
03-04-2008 03:43 AM
Hi,
it should be quite straight forward.
Just need this command
set span "Source_VLAN_Number" "Destination_Port_Number"
I you have a range of VLANs, you can use this format:
set span 1-20 1/1
To verify your config, you can use:
show span
command.
HTH
Ivan
[please rate any helpful posts]
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide