03-04-2008 05:15 AM - last edited on 03-25-2019 06:56 PM by ciscomoderator
What is translation rule that config in voice gateway router? Is that same translation pattern in CCM ?
03-04-2008 06:09 AM
Hi,
It's something similar. You can change calling/called number using regular expressions. Here you can find some more info: http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
--
regards,
pk
03-04-2008 06:10 AM
No, it is not the same. See following link for IOS translation rules.
http://cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
Hope this helps, please rate post if it does!
03-05-2008 05:24 AM
PK and bevilacqua, thank a lot for your info.
And Do you have experience about E1 config? Can I use translation rule or translation pattern in CUE for DID function with E1?
03-05-2008 06:22 AM
Certainly, the translation-profile can be applied at level of voice-port, incoming or outgoing DP.
03-05-2008 06:34 AM
It depends on you ccm configuration.
If you want use h323 you can do it on router with translation rule or on ccm with translation pattern. If you want to use MGCP for E1 you can do it only on CCM with translation pattern.
--
regards,
PK
03-05-2008 06:02 PM
Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide