Novell Client / IPSec Tunnel

npo-saturn · ‎03-04-2008

Hi!

My organiztion has office and central site inter connected through IPSec VPN using two ISR 1841.

On our central site we have Novell server. At our office we have client PC witch Novell client v 4.91.

When client copy file to Novell server through IPSec VPN (crypto map on interface) - file on Novell server to come to corrupt.

When client copy file to Novell server without IPSec VPN (no crypto map on interface) - file on Novell server to come to ÐžÐš.

Our parameters:

crypto ipsec df-bit clear

crypto isakmp policy 10

encr 3des

authentication pre-share

group 2

lifetime 28800

crypto isakmp key x address y

crypto map 10 10 ipsec-isakmp

set peer y

set transform-set toCenter

match address Center

PS: Copy to Windows server is always OK.

Is it possible to resolve these problem?

Report Inappropriate Content · ‎03-10-2008

If you just want to allow the IPSec traffic between the Novell to pass through the PIX only, you just need to open up the esp protocol and for the Novell that is inside the PIX and udp port 500