03-04-2008 07:41 AM - edited 03-05-2019 09:32 PM
Does any one knows what are the average IP performance for 2801,2811,2821,2851 for flows beetwen two onboard FE. With no sepcial features, only NAT nat QOS. No Voice etc.
Solved! Go to Solution.
03-04-2008 10:41 AM
Additional considerations when using the document Edison provided,
"only NAT nat QOS" might constitute a service.
The Mbps rating might need to be halved to support full duplex bandwidth.
Basing performance on 64 byte packets is worse case, as packet size increases so does effective bandwidth. With usual packets sizes, you might be able to obtain 2 to 4 times the effective bandwidth.
03-04-2008 08:43 AM
03-05-2008 03:37 AM
Hello!, is there a link in the Cisco web to download the routerperformance.pdf int the case it will be updated?
Best Regards!
03-05-2008 10:45 AM
03-10-2008 03:13 AM
Fantastic!!!! Thanks!
03-04-2008 10:41 AM
Additional considerations when using the document Edison provided,
"only NAT nat QOS" might constitute a service.
The Mbps rating might need to be halved to support full duplex bandwidth.
Basing performance on 64 byte packets is worse case, as packet size increases so does effective bandwidth. With usual packets sizes, you might be able to obtain 2 to 4 times the effective bandwidth.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: