Unanswered Question
Mar 4th, 2008
User Badges:

If i have one wireless access controller with 8 LWAPP.

Suppouse the wireless access controller fail (hardware fail).

What happen with the lwapp ap's during the fail.

How log will work the lwapp ap's without the WLC.

What happen if the lwapp ap's are power off or reseted?

How can I design a fail over strategy for the wlc and lwapp '

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Tue, 03/04/2008 - 10:44
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Rafael,

The design for redundancy with LWAPP and the WLC involves the addition of a second controller. Have a look at this good doc;

WLAN Controller Failover for Lightweight Access Points Configuration Example


Hope this helps!



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode