cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
248
Views
0
Helpful
1
Replies

LWAPP AIRONETS

Rafael Jimenez
Level 4
Level 4

If i have one wireless access controller with 8 LWAPP.

Suppouse the wireless access controller fail (hardware fail).

What happen with the lwapp ap's during the fail.

How log will work the lwapp ap's without the WLC.

What happen if the lwapp ap's are power off or reseted?

How can I design a fail over strategy for the wlc and lwapp '

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Rafael,

The design for redundancy with LWAPP and the WLC involves the addition of a second controller. Have a look at this good doc;

WLAN Controller Failover for Lightweight Access Points Configuration Example

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml#c4

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: