Setting up LAN extension

Unanswered Question

Hi,


For setting up a LAN extension between 2 geographicaly dispersed 6500 switches, the only configuration needed is VLAN trunk right? No need for channel group if I'm only using 1 copper link?


SW1

interface GigabitEthernet12/42

description LAN EXTENSION

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

end



SW2

interface GigabitEthernet12/42

description LAN EXTENSION

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

end


I want all VLAN's to be passed so I wont specify the allowed vlans...


Am I correct? Or am I missing something?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Tue, 03/04/2008 - 10:49
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

You aren't missing anything, you are correct in all counts. Good luck !


__


Edison.

Actions

This Discussion