03-04-2008 01:13 PM - edited 03-11-2019 05:12 AM
Hi,
I am having problem to back up image file of FWSM in 6509-E , I am doing it as below,
FWSM-1# show flash
flash file system: version:3 magic:0x12345679
file 0: origin: 0 length:5865472
file 1: origin: 5865472 length:5548904
file 2: origin:11414528 length:5019
file 3: origin:11419648 length:28371
file 4: origin:21085696 length:280
-----
FWSM-1# dir flash:
Directory of flash:/
2 -rw- 5548904 <no date> asdm
1 -rw- 5865472 <no date> image
3 -rw- 28371 <no date> startup-config
------------
FWSM-1# copy flash:image tftp:
Source filename [image]?
Address or name of remote host []? 10.1.1.1
Destination filename [image]?
Failed to open image in flash.
if I copy startup-config file, its work fine,
is image file has hidden extension other than bin?
Regards,
03-04-2008 02:38 PM
Hi,
The command you entered is OK
copy flash:image tftp://X.X.X.X/image where X.X.X.X is the IP of your tftp server. It could be some limitation with your current tftp application. I suggest you try this tftp program
03-05-2008 03:26 AM
Hi,
I am still unable to copy through this tftpd32 software.
Regards,
03-05-2008 07:22 PM
Mohammed originally posted this question in the WAN Routing and Switching forum. I provided some answers and we had some following posts to clarify some aspects of the problem. I came to the conclusion that the real problem is that the FWSM supports TFTP of the image to flash but does not support TFTP from flash. Then Mohammed posted the same question here. I still believe that the issue is that it is not supported to TFTP from flash. If anyone can offer any reference to show that it is supported then Mohammed and I would appreciate it. Otherwise I think that my theory is correct.
HTH
Rick
06-17-2008 07:08 AM
well this is what i see on the fwsm:
fwsm# copy ?
Usage: copy http[s]://[
flash:[image | pdm]
copy [/noconfirm] http[s]://[
disk:[
copy http[s]://[
[startup-config | running-config]
copy ftp://[
flash:[image | pdm]
copy [/noconfirm] ftp://[
disk:[
copy ftp://[
[startup-config | running-config]
copy tftp[:[[//location][/pathname]]] flash:[image | pdm]
copy [/noconfirm] tftp[:[[//location][/pathname]]] disk:[
copy tftp[:[[//location][/pathname]]] [startup-config | running-config]
copy flash:[image | pdm] tftp[:[[//location][/pathname]]]
copy [/noconfirm] flash:[image | pdm] disk:[
copy flash:[image | pdm]
ftp://[
copy [/noconfirm] disk:[
copy [/noconfirm] disk:[
copy [/noconfirm] disk:[
copy [/noconfirm] disk:[
copy [/noconfirm] disk:[
copy [startup-config | running-config] tftp[:[[//location][/pathname]]]
copy [/noconfirm] [startup-config | running-config] disk:[
copy [startup-config | running-config]
ftp://[
copy startup-config running-config
copy running-config startup-config
copy capture:[
06-17-2008 07:38 AM
this is working with our fwsm when using a ftp box:
fwsm# sh ver
FWSM Firewall Version 2.3(2)
FWSM Device Manager Version 4.1(3)
Compiled on Wed 06-Apr-05 13:08 by dalecki
fwsm# copy flash:image ftp://userid:password@xxx.xxx.xxx.xxx/Cisco/image
bt
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: