CCM 4.1.3 Route Group / Route List Question

dtran · ‎03-04-2008

Hello all,

I have a question on how CallManager works with multiple H323 gateways in a route group. For instance I have two H323 gateways in RG1 and an MGCP gateway in RG2 and in RL1 I have RG1 then RG2. And here are my questions.

- If one of the H323 gateways in RG1 lost connectivity to PSTN. Will CCM automatically route calls to the other H323 gateway in RG1? if so how does CCM know that one of the H323 gateways has lost connectivity to PSTN or will CCM route calls to the MGCP gateway in RG2 ?

Thanks very much in advance !!!

Danny

gogasca · ‎03-04-2008

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddd088b/0#selected_message

Check my previous post and let me know if it answer your question

dtran · ‎03-04-2008

Hi, thank you and I appreciate your response !!!

So in order for CCM to hunt for other H323 gateway I would need to add this command "no dial-peer outbound status-check pots" to all H323 gateways ?

thanks again !!!

Danny

dtran · ‎03-05-2008

Hi,

My other question is what happen if one of the gateways is dead completely offline. How will CCM know to hunt for other available gateways in RG/RL ?

Thanks !!!

Danny