dont know why but this did not help here is debug:

Mar 6 14:18:15.358: regxrule_get_profile_from_trunkgroup: Voice port 0x81F778CC does not belong to any trunk group

Mar 6 14:18:15.366: regxrule_stack_pop_RegXruleNumInfo: stack=0x82250E38; count=1

Mar 6 14:18:15.370: regxrule_stack_push_RegXruleNumInfo: stack=0x82250E38; count=0

Mar 6 14:18:15.370: regxrule_profile_translate: number=244 type=unknown plan=unknown numbertype=calling

Mar 6 14:18:15.370: regxrule_match: No match; number=244 rule precedence=1

Mar 6 14:18:15.370: regxrule_profile_match: No match found

Mar 6 14:18:15.370: regxrule_profile_translate: No match: number=244 type=unknown plan=unknown

Mar 6 14:18:15.370: regxrule_profile_translate: number= type=unknown plan=unknown numbertype=redirect-called

Mar 6 14:18:15.374: regxrule_get_RegXrule: Invalid translation ruleset tag=0

Mar 6 14:18:15.374: regxrule_profile_match: Error: ruleset for redirect-called number not found

Mar 6 14:18:15.374: regxrule_profile_translate: No match: number= type=unknown plan=unknown

Mar 6 14:18:16.454: regxrule_profile_translate: number=9 type=unknown plan=unknown numbertype=called

Mar 6 14:18:16.454: regxrule_match: No match; number=9 rule precedence=1

Mar 6 14:18:16.454: regxrule_profile_match: No match found

Mar 6 14:18:16.454: regxrule_profile_translate: No match: number=9 type=unknown plan=unknown

Mar 6 14:18:17.794: regxrule_profile_translate: number=92 type=unknown plan=unknown numbertype=called

Mar 6 14:18:17.794: regxrule_match: No match; number=92 rule precedence=1

Mar 6 14:18:17.794: regxrule_profile_match: No match found

_______________________________________

I have shanged one thing:

translation-rule 1

Rule 0 ^9 0

voice-port 1/2

translate called 1

I do not have any dial-peer that mathes 0, so the problem is solved. Thank you for an idea. Please tell me what is the difference between:

"translation rule" - works for me.

"voice translation rule" - did not worked.

The "translation-rule" command is an older command. The "voice translation-rule" command is the recommended way to manipulate digits and is more flexible. They also have slightly different syntax. That being said, if this config using "translation-rule" works, by all means use it.

Brandon

Brandon, why "voice translation rule" did not work? How can I make them work? Thank you.

Using the previous config that I suggested, try changing the translation profile under the voice port to "translation-profile incoming profile1".

Brandon