Cisco PIX 515E (VPN Configuration)

Answered Question
Mar 4th, 2008

Hi,

Can some one tell me how to configure both site to site VPN and Remote VPN in PIX 515 E (in a single pix device)? Currently the IOS version in the pix is 6.3(3).Thanks


Rgds,

KTR


Correct Answer by brettmilborrow about 8 years 11 months ago

This page should help you out, but please note that the extra authentication bits are not required. See below for commands not required for your configuration (simply leave them off)


http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml


NOT REQ'D:

HUB PIX:

aaa-server mytacacs protocol tacacs+

aaa-server mytacacs (inside) host 10.48.66.102 cisco timeout 5

crypto map mymap client authentication mytacacs


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
brettmilborrow Thu, 03/06/2008 - 16:02

This page should help you out, but please note that the extra authentication bits are not required. See below for commands not required for your configuration (simply leave them off)


http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml


NOT REQ'D:

HUB PIX:

aaa-server mytacacs protocol tacacs+

aaa-server mytacacs (inside) host 10.48.66.102 cisco timeout 5

crypto map mymap client authentication mytacacs


Actions

This Discussion