cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
721
Views
0
Helpful
1
Replies

Cisco PIX 515E (VPN Configuration)

trkarthik05
Level 1
Level 1

Hi,

Can some one tell me how to configure both site to site VPN and Remote VPN in PIX 515 E (in a single pix device)? Currently the IOS version in the pix is 6.3(3).Thanks

Rgds,

KTR

1 Accepted Solution

Accepted Solutions

brettmilborrow
Level 1
Level 1

This page should help you out, but please note that the extra authentication bits are not required. See below for commands not required for your configuration (simply leave them off)

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml

NOT REQ'D:

HUB PIX:

aaa-server mytacacs protocol tacacs+

aaa-server mytacacs (inside) host 10.48.66.102 cisco timeout 5

crypto map mymap client authentication mytacacs

View solution in original post

1 Reply 1

brettmilborrow
Level 1
Level 1

This page should help you out, but please note that the extra authentication bits are not required. See below for commands not required for your configuration (simply leave them off)

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml

NOT REQ'D:

HUB PIX:

aaa-server mytacacs protocol tacacs+

aaa-server mytacacs (inside) host 10.48.66.102 cisco timeout 5

crypto map mymap client authentication mytacacs

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card