VPN Confuguration

trkarthik05 · ‎03-04-2008

Can some one tell me how to configure both site to site VPN and Remote VPN in PIX 515 E (in a single pix device)? Currently the IOS version in the pix is 6.3(3).Thanks

massimiliano.serafino · ‎03-04-2008

Hi,

For site-to site VPN Look at :

http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html

For Remote Access look at :

http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/basclnt.html

I hope this helps.

Best regards.

Massimiliano.

trkarthik05 · ‎03-05-2008

Hi,Thanks for your reply :-) At present site-to-site configuration is there in my pix. It is working fine without any problem. But I need remote VPN also in the same pix.

For Remote VPN if I apply the below mentioned line means site to site vpn is getting disturbed

Crypto map outside_map interface outside (remote VPN)

The below line is used for Site -To -Site configuration

Crypto map client1 interface outside (S-T-S)

I need to configure BOTH Remote VPN and SITE TO SITE in the same pix.

Rgds,

KTR

massimiliano.serafino · ‎03-05-2008

Hi,

Look at http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800948b8.shtml

Massimiliano.