cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
559
Views
0
Helpful
4
Replies

CME - 7961 Phone - extention doesn't show up on button 1

miqbal_786
Level 1
Level 1

Hi Guys,

I am having such a weird issue with 7961 phone. I have configured 7961 phone in CME ver 4.0.3 and what happened that extention is not showing up on button 1 but from button 2-6 speed dials are showing up see the configs below:

ephone-dn 55 dual-line

no call-waiting beep

number 365

label Regional HR Admin - 365

description 487-689-3333

name Regional HR Admin

call-forward max-length 3

call-forward busy 370

call-forward noan 370 timeout 20

corlist incoming Filter5-RegionalHR

!

ephone 55

mac-address 001D.452C.5E03

speed-dial 1 91487-689-3322 label "Shawn_B_Cell"

speed-dial 2 91487-689-3222 label "Michelle_H_Cell"

speed-dial 3 487-689-3111label "VoiceMail_Brampton"

speed-dial 4 91487-689-3444 label "Payroll"

speed-dial 5 91487-689-8888 label "Home"

speed-dial 6 91487-689-7777 label "Telephone_Vendor"

speed-dial 7 91487-689-3666 label "Credit_Office"

speed-dial 8 918664544340 label "CIBC"

speed-dial 9 91487-689-3333 label "Zeller_Head_Office"

speed-dial 10 9487-689-3333 label "Z417Hamilton"

type 7961

button 1o55,58

Thanks in advance

4 Replies 4

Rajesh Revuru
Level 4
Level 4

Iam not sure if this because of you are using overlay extensions. Can you try without overlay and see if it shows extension

button 1:55

Thanks for your response!!!

it was working ok yesterday and was configured as a single line phone so i reconfigured it as a Dual-line ( ephone-dn xx dual-line)so that user could use transfer feature. If i see the configs in CME its there.

Thanks

Ok. if you have changed it from single phone to dual-line, you have to apply again. just do

no button

button

and reset the phone, hopefully it should fix

Since i don't have access to the phone physically, I reconfigured it and reset it via Telephony-services ---> reset 001D.452C.5E03 remotely but didn't get any message and still no change.

Its not even getting registered with CME.

Thanks