WCS can't logon to ACS 3.3

js88888888 · ‎03-05-2008

Just fired up a new Windows WCS install and have been trying various optoins to get it to work with ACS (for admin only at this point). I've tried RADIUS (IETF) and tacacs+(Cisco IOS) with various failed attempts logged in ACS. Any ideas what I'm missing?

thanks

cjoseph23 · ‎04-10-2008

I've also been trying to use ACS to authenticate users to manage my WCS. I have not been able to make it work either. During my research I found this document which states it is no possible at this time. Not sure what version of ACS or WCS they are referring to.

http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#apr6

I am using WCS 4.2.81 and ACS 4.1 (both on different servers) If this is possible I would like to know how I need to configure my ACS server.

regards,

cyril

craig.eyre · ‎04-15-2008

Hi Cyril,

Have you tried following this document?

http://www.cisco.com/en/US/docs/wireless/wcs/4.1/configuration/guide/wcsadmin.html#wp1064100

Craig

ks4614 · ‎04-16-2008

I was having a similar issue and discovered the following bug:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCso35894

I tried the work around and everything worked as configured.

Hopefully this will help you.

Kent