ASA5540 Tunnel Problem

Answered Question
Mar 6th, 2008

I'm setting up ASA5540 for VPN Remote Access into my LAN. The tunnel between clients and ASA is successfully established and the client is assigned ip address. The problem is I cannot access any resource in my LAN despite the full access privilege i have, when i debug while trying to access my LAN no error whatsoever is recorded, its like interesting traffic is not reaching my ASA. what could be the problem? Please assist.

Correct Answer by acomiskey about 8 years 11 months ago

Nat-traversal is disabled by default in version 7.0. I would upgrade to 7.2 or enable nat-traversal with the following command.


isakmp nat-traversal

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
acomiskey Thu, 03/06/2008 - 13:36

Nat-traversal is disabled by default in version 7.0. I would upgrade to 7.2 or enable nat-traversal with the following command.


isakmp nat-traversal

Actions

This Discussion