IP Communicator registration issue

Unanswered Question

HI,


We have two Call Managers installed on our network, one on the 4.1 version which supports IP Communicator and the other is on 4.0 which does not support IP communicator. We are slowly migrating all the system to the new call manager with 4.1 version. Now i need to install IP communicator for one of our customer and when i installed the Ip communicator it registers with the old Call manager with 4.0 version in the initial configuration process. Since it is registered with a wrong call manager it is not working.


Now i need to change the call manager IP address settings on the IP communicator. Can any one please help me out in doing so.


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 1 (1 ratings)
Loading.
somishra Fri, 03/07/2008 - 06:34
User Badges:
  • Cisco Employee,

On the IP Communicator -- Right Click -- Preferences -- Network -- TFTP Servers -- Select the radio button for Use these TFTP servers and enter the ip address of the Callmanager 4.1 server.


tnx

somishra

Actions

This Discussion