03-06-2008 09:19 AM - edited 03-15-2019 09:16 AM
Is it possible to configure Unity express to not require passwords. I know that when you first set up users, you can give a blank password initially. but when the user enrols, it makes you set a password. Is there a way to set the system so that it is not compulsory for users to set a password when they enrol.
Solved! Go to Solution.
03-06-2008 01:47 PM
Hi David,
This is not possible my friend.
User Interfaces/Passwords
Cisco Unity Express R1 has three separate user interfaces: a GUI, CLI and TUI (subscriber telephony interface). There are two types of users: administrators and end users (subscribers). Administrators can have access to the GUI and the CLI; subscribers can have access to the GUI and TUI.
The GUI and CLI login protections are referred to as a "password", while TUI login protection is referred to as a "PIN".
GUI
All User IDs defined on the system are password controlled on login, regardless of whether the User ID has administrator or subscribers privileges. Passwords are **mandatory and are 3 to 32 characters long, case sensitive, and allow alphabetic and numeric characters.
TUI
All mailboxes defined on the system are PIN controlled on login. PINs are **mandatory, are 3 to 19 characters long, and allow numeric characters.
From this good CUE Security doc;
When the password is left blank in the initial config, CUE marks it as expired and forces the user to set one.
Hope this helps!
Rob
03-06-2008 01:47 PM
Hi David,
This is not possible my friend.
User Interfaces/Passwords
Cisco Unity Express R1 has three separate user interfaces: a GUI, CLI and TUI (subscriber telephony interface). There are two types of users: administrators and end users (subscribers). Administrators can have access to the GUI and the CLI; subscribers can have access to the GUI and TUI.
The GUI and CLI login protections are referred to as a "password", while TUI login protection is referred to as a "PIN".
GUI
All User IDs defined on the system are password controlled on login, regardless of whether the User ID has administrator or subscribers privileges. Passwords are **mandatory and are 3 to 32 characters long, case sensitive, and allow alphabetic and numeric characters.
TUI
All mailboxes defined on the system are PIN controlled on login. PINs are **mandatory, are 3 to 19 characters long, and allow numeric characters.
From this good CUE Security doc;
When the password is left blank in the initial config, CUE marks it as expired and forces the user to set one.
Hope this helps!
Rob
03-06-2008 01:57 PM
many thanks Rob,
exactly what I was looking for.
03-06-2008 02:09 PM
Hi David,
You are most welcome :)
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide