03-06-2008 10:23 AM - edited 03-05-2019 09:35 PM
Hi,
I've 2 Catalyst 4503, each one of the with a WS-X4224-RJ45V blade and it says this error:
18:03:43: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Checking the config, the power default is on 15400 mW, but if I check the inline consumption, it show me this:
sh power inline module 3
Available:800(w) Used:43(w) Remaining:757(w)
Interface Admin Oper Power(Watts) Device Class
From PS To Device
--------- ------ ---------- ---------- ---------- ------------------- -----
Fa3/1 auto off 0.0 0.0 n/a n/a
Fa3/2 auto off 0.0 0.0 n/a n/a
Fa3/3 auto off 0.0 0.0 n/a n/a
Fa3/4 auto on 429496 42946. IP Phone 7911 2
Fa3/5 auto off 0.0 0.0 n/a n/a
Fa3/6 auto off 0.0 0.0 n/a n/a
Fa3/7 auto off 0.0 0.0 n/a n/a
Fa3/8 auto off 0.0 0.0 n/a n/a
Fa3/9 auto off 0.0 0.0 n/a n/a
Fa3/10 auto off 0.0 0.0 n/a n/a
Fa3/11 auto power-deny 0.0 0.0 n/a n/a
Fa3/12 auto off 0.0 0.0 n/a n/a
Fa3/13 auto off 0.0 0.0 n/a n/a
Fa3/14 auto power-deny 0.0 0.0 Cisco/Ieee PD 2
Fa3/15 auto off 0.0 0.0 n/a n/a
Fa3/16 auto off 0.0 0.0 n/a n/a
Fa3/17 auto off 0.0 0.0 n/a n/a
Fa3/18 auto on 429496 42944. IP Phone 7941 2
Fa3/19 auto on 429496 42946. IP Phone 7911 2
Fa3/20 auto off 0.0 0.0 n/a n/a
Fa3/21 auto on 429496 42944. IP Phone 7941 2
Fa3/22 auto on 429496 42946. IP Phone 7911 2
Fa3/23 auto on 429496 42944. IP Phone 7941 2
Fa3/24 auto off 0.0 0.0 ATA 186 n/a
--------- ------ ---------- ---------- ---------- ------------------- -----
Totals: 6 on 429493 257672
The values mentioned are out of the threshold stablished, so it seems the IOS is providing wrong information. There is a bug related (CSCef49715), but it's not the same blade and power supply.
TIA
Andres Pasten
Adexus S.A.
03-08-2008 10:42 AM
Please describe IOS version running on this box.
__
Edison.
03-10-2008 05:24 AM
Hi,
It's running IOS version cat4000-i5k91s-mz.122-25.EWA10.bin
TIA
Andres Pasten
Adexus S.A.
03-17-2008 06:47 AM
I am seeing the same error message on a 4507. Were you able to figure out what the problem was?
Thanks,
Robert
03-19-2008 02:36 PM
Hi,
The solution is an upgrade to cat4000-i5k91s-mz.122-25.EWA13.bin
Andres Pasten
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: