Route map match statement

Unanswered Question
Mar 6th, 2008
User Badges:

i have two interfaces :

interface Gi3/4

ip address 10.10.10.14 255.255.255.0


interface tunnel 1

ip address 172.18.36.2 255.255.255.0


i want to use the route map to take all the traffic incoming on Gi3/4 & redirect that traffic to the interface tunnel


route-map test permit 10

match interface Gi3/4


is the command "match" above will match all incoming traffic on Gi3/4 or there is another solution?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Thu, 03/06/2008 - 11:23
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


access-list 101 permit ip any any


route-map REDIR permit 10

match ip address 101

set interface tunnel1


int gi3/4

ip policy route-map REDIR


HTH


Jon

Actions

This Discussion