RME Automatically add devices?

Unanswered Question
Mar 6th, 2008
User Badges:

I'm running 2 servers in a DCR master/slave scenario and for some reason RME is not automatically adding the devices into the inventory.

I've had to manual add them via RME/Devices/Device Managment/RME Devices/Add Devices/ Add all.

I've checked the 'Automatically Manage Devices from Credential Repository' and this is ok.

Any one got any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe Clarke Thu, 03/06/2008 - 20:06
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Enable Device Management Operations debugging under RME > Admin > System Preferences > Application Loglevel Settings. Then try removing one device from DCR, then add it back. Then check the EssentialsDM_Server.log for errors. Of course, removing an re-adding the device from DCR may just work.

a.goldsmith Thu, 03/06/2008 - 21:52
User Badges:

Yep, looks like the inintial adding of DCR devices into RME on the slave was stuck.

Once I added all, seems to remove and add ok on RME (Slave). Weird, but seems ok now.


This Discussion