L2 connectivity between HO and 14 branch offices via different ISP

san_dec21 · ‎03-06-2008

Thanks in advance

Can some one help me argentally

One of customer wants the solution on how to connect Ho with 14 branch offices via L2 connectivity provide by different isp.

In short scenario is just like below

HO--------ISP---------Branch office1

HO--------ISP----------Branch office

2851L2 port----ISP--1841L3 port

How i can configure the router at ho office

ebreniz · ‎03-13-2008

Here are two very helpful links... the first one is a nice introduction to L2TPv3 with some basic examples... the second link is much more in-depth with regard to L2TPv3.

http://www.cisco.com/en/US/netsol/ns588/networking_solutions_white_paper09186a008017fa6e.shtml

http://www.cisco.com/en/US/docs/ios/12_4/wan/configuration/guide/hl2tpv3_ps6350_TSD_Products_Configuration_Guide_Chapter.html

Rick Morris · ‎03-13-2008

ebreniz...good post, I set up our data center and home office via l2tp and used these links, now not as easy as the doc's say but a very good resource to start from.