PIMG issue for connecting CUC and Nortel PBX, need help

Unanswered Question
Mar 7th, 2008

Hi

We use 8 ports UNITY-PIMG-DIG to connect a Nortel PBX and Cisco Unity connection. Once it works fine. Now we meet a problem. The first two ports of the PIMG can not pick up the call and transfer it to the Unity correctly. It makes Nortel PBX identify this as a failed call and transfer it to the Nortel attendant. I make a simple test, when I connected the line once was plug in the first two ports of PIMG to a standard Nortel phone, it rings correctly.

I traced both of the call, here is the log.

(1) When connect the line to PIMG

.trac 12 1 4 1

TN 012 1 04 01

KEY 0 SCR MARP ACTIVE TN 012 1 04 01 DIRECT MW_CALL

ORIG 012 1 04 01 0 SCR MARP 0 7569 2616

TERM 000 0 12 15 0 SCR MARP 0 6714 2616

DIAL DN NONE

MAIN_PM ESTD

TALKSLOT ORIG 94 TERM 30

QUEU NONE

CALL ID 0 6541

(2) When connect the line to a phone

.trac 12 1 4 1

TN 012 1 04 01

KEY 0 SCR MARP ACTIVE TN 012 1 04 01

ORIG 012 1 04 01 0 SCR MARP 0 7569 2616

TERM DN 6714

TDTN 16 SLOT 15 PTY SLOT 79

DIAL DN 6714

MAIN_PM RING AUX_PM

TALKSLOT ORIG 81 TERM 17 JUNCTOR ORIG0 TERM0

QUEU CAD

CALL ID 0 7125

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion