PIX 515E

Answered Question
Mar 7th, 2008
User Badges:

hi,


I just want to check if this is possible.

PIX 515E running 6.3


I want certain internal networks to

use a different PAT global address.


192.168.1.0 ---- > PAT to 203.115.155.1

192.168.2.0 -----> PAT to 203.115.155.2

so in this case anything coming from 192.168.1.0 will be translated to 203.115.155.1 on the outside interface


anything coming 192.168.2.0 will be translated to 203.115.155.2 on the

outside interface.



Correct Answer by sundar.palaniappan about 9 years 3 months ago

Sure, use a different NAT ID to group them to the corresponding global (PAT) address.


nat (inside) 1 192.168.1.0 255.255.255.0

nat (inside) 2 192.168.2.0 255.255.255.0


global (outside) 1 203.115.155.1

global (outside) 2 203.115.155.2


HTH


Sundar

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
sundar.palaniappan Fri, 03/07/2008 - 17:08
User Badges:
  • Green, 3000 points or more

Sure, use a different NAT ID to group them to the corresponding global (PAT) address.


nat (inside) 1 192.168.1.0 255.255.255.0

nat (inside) 2 192.168.2.0 255.255.255.0


global (outside) 1 203.115.155.1

global (outside) 2 203.115.155.2


HTH


Sundar

Actions

This Discussion