03-07-2008 08:44 PM - edited 03-11-2019 05:14 AM
hi
please advice me to upgrade pix515E IOS version from 6.2 to latest pix ios version or can please send some docement.
note:i have these configuration in my pix firewall.
Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
rgds
kalpa
Solved! Go to Solution.
03-13-2008 02:09 PM
kalpa
There are memory requirements for upgrading to version 7 (and version 8). To upgrade a PIX515 to version 7 requires at least 64 MB of RAM. According to your post you have 32 MB. So to do an upgrade you will first have to upgrade the memory. (and depending on your license requirements it could possibly require 128 MB).
HTH
Rick
03-13-2008 12:24 PM
You should upgrade the PIX software in a incrementing fashion (i.e 6.x to 7.x to 8.x). Following links may help you
http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a5d.shtml
03-13-2008 02:09 PM
kalpa
There are memory requirements for upgrading to version 7 (and version 8). To upgrade a PIX515 to version 7 requires at least 64 MB of RAM. According to your post you have 32 MB. So to do an upgrade you will first have to upgrade the memory. (and depending on your license requirements it could possibly require 128 MB).
HTH
Rick
03-13-2008 02:30 PM
I'm setting up my lab to test. The issue is with a PIX 501 with Ver 6.3 going into a ISP router. The ISP is running some weird Radio Frequency network connections.
03-16-2008 05:46 AM
Hi,
The PIX 501 and 506 connot be upgaded to software version 7.x
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide