On Unity express 2.3 I cannot seem to get the original called number to take
effect. It is still using last redirected number for VM. Have changed it
back and forth serveral times with no success. I have not reload it yet but don't see why I should have to. Anyone seen this issue??
If CUE is integrated with Callmanager Express there are additional config changes required on the CME side;
If you configure the OCN option for Cisco Unity Express on a Cisco Unified CME platform, you must configure Cisco Unified CME to correspond. If you configure OCN for Cisco Unity Express on a Cisco Unified Communications Manager platform, no additional configuration on Cisco Unified Communications Manager is required.
SCCP: Setting a Mailbox Selection Policy for Cisco Unity Express or a PBX Voice-Mail Number
To set a policy for selecting a mailbox for calls from a Cisco Unified CME system that are diverted before being sent to a Cisco Unity Express or PBX voice-mail pilot number, perform the following steps.
Cisco Unified CME 4.0 or a later version.
2. configure terminal
3. dial-peer voice tag voip
dial-peer voice tag pots
4. mailbox-selection [last-redirect-num | orig-called-num]
Hope this helps!