Rob Huffman Sun, 03/09/2008 - 10:03
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Thejas,


The required steps are nicely listed in this doc;


Installing and Upgrading Cisco Unified CME Software


http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00808777e0.html


This thread has a nice note from Paolo!


http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde8b54/2#selected_message




Why don't you start by upgrading IOS to 12.4(11)XJ4, for CME 4.1. This seems to be a highly rated and stable IOS/CME combination.



12.4(11)XW2 - CME 4.2




12.4(15)T - CME 4.1




12.4(11)XJ - CME 4.1



From this doc;


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm



Hope this helps!

Rob

Actions

This Discussion