Time on servers

Unanswered Question
Mar 10th, 2008
User Badges:

The time on our servers. CCM and Unity are one hour off. but the phones have the correct time. if I set the ccm sever to the correct time the phones go an hour ahead. If I set the Unity servrs to the correct time they stop answering calls.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Brandon Buffin Mon, 03/10/2008 - 08:05
User Badges:
  • Purple, 4500 points or more

Double-click the time in the system tray. Go to the Time Zone tab. Make sure that "Automatically adjust clock for daylight saving changes" is checked.


Brandon

Tray Stoutmeyer Tue, 03/11/2008 - 20:49
User Badges:
  • Cisco Employee,

I don't have anything for you on the ccm side of things but I do have the field notice for the DST and Unity here.


http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml


Make sure your Unity was patched correctly in the first place the first time this DST was an issue. If not, patch it and test. If this isn't the issue then we can go from there.


Thanks!


Tray

Tommer Catlin Wed, 03/12/2008 - 08:56
User Badges:
  • Green, 3000 points or more

This is correct. If your server time on the clock still says "Standard" you do not have the Windows patch installed. It should say (example) Easter Daylight.


The two patches mention in the field notice are what you need. They are actually in the Cisco DST download in a sub folder. Download, and run. You will not need to reboot your computer on the windows patches

Actions

This Discussion