load-intervall on policy-map on 7606 router

Unanswered Question
Mar 10th, 2008

hi,

we have a 7606 router which has policy-maps instaled:

mplsgrzpe01#sh policy-map interface GigabitEthernet1/1/1.1702

GigabitEthernet1/1/1.1702

Service-policy output: egress_queue_parent_2000

Counters last updated 00:00:05 ago

Class-map: class-default (match-any)

269116 packets, 232562338 bytes

30 second offered rate 1045000 bps, drop rate 0 bps

Match: any

Queueing

queue limit 2048 packets

(queue depth/total drops/no-buffer drops) 0/0/0

(pkts output/bytes output) 251106/216408176

shape (average) cir 1900000, bc 7600, be 7600

target shape rate 1900000

Queue-limit 2048

Service-policy : egress_queue

Counters last updated 00:00:05 ago

queue stats for all priority classes:

Queueing

queue limit 409 packets

(queue depth/total drops/no-buffer drops) 0/16901/0

(pkts output/bytes output) 51180/44184584

Class-map: system_intern (match-any)

2273 packets, 282846 bytes

30 second offered rate 0 bps, drop rate 0 bps

Match: dscp cs6 (48)

Match: mpls experimental topmost 6

Queueing

queue limit 102 packets

(queue depth/total drops/no-buffer drops) 0/0/0

(pkts output/bytes output) 2270/282530

bandwidth 5% (95 kbps)

Class-map: voice (match-any)

68371 packets, 59641582 bytes

30 second offered rate 287000 bps, drop rate 103000 bps

Match: dscp ef (46)

Match: mpls experimental topmost 5

Priority: 20% (380 kbps), burst bytes 9500

Class-map: gold (match-any)

68420 packets, 59674152 bytes

30 second offered rate 287000 bps, drop rate 0 bps

Match: dscp af42 (36)

Match: mpls experimental topmost 4

Queueing

queue limit 512 packets

(queue depth/total drops/no-buffer drops) 0/0/0

(pkts output/bytes output) 68147/59439118

bandwidth 25% (475 kbps)

Class-map: silber (match-any)

68423 packets, 59648166 bytes

30 second offered rate 287000 bps, drop rate 0 bps

Match: dscp af32 (28)

Match: mpls experimental topmost 3

Queueing

queue limit 409 packets

(queue depth/total drops/no-buffer drops) 0/0/0

(pkts output/bytes output) 68174/59438380

bandwidth 20% (380 kbps)

Class-map: class-default (match-any)

61629 packets, 53315592 bytes

30 second offered rate 287000 bps, drop rate 0 bps

Match: any

Queueing

queue limit 512 packets

(queue depth/total drops/no-buffer drops) 0/0/0

(pkts output/bytes output) 61335/53063564

bandwidth 25% (475 kbps)

mplsgrzpe01#

the problem is that if i make a "sh policy-map int gig1/1/1.1702" the time update time is very long, although load-interval is set to 30 seconds.

for example if there is traffic with 300kb/s in voice-queue, it takes a long time (till minutes that the "offered rate" is 300 kb/s).

if i stop forwarding traffic to the voice-queue, it also takes minutes, tille the "offered-rate" value goes down to zero bits per seconds.

Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB2,

System image file is "bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRB2.bin"

Last reload type: Normal Reload

the next problem is, that we have drops in our voice_queue althoug there is 380kb/s reserved in voice-queue and we do NOT exceed this value

thanks for any help

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion