Time issues on CallManager 4.2

Unanswered Question
Mar 10th, 2008
User Badges:

Using CallManager 4.2 and the time on some of the phones adjusted with Daylight savings and some didn't. I applied the needed DST updates before the last Daylight savings change. Any ideas? Is there a way I can change it manually. I know you can on the some of the older phones.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Mon, 03/10/2008 - 07:26
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Ashley,


If the phone models that didn't change properly are 3rd generation models like the 7941 and 7961 you should be able to do a "Reset" from CCM Admin and have them pickup the proper time.


Hope this helps!

Rob

asmith252 Mon, 03/10/2008 - 12:37
User Badges:

We are using the 7941 series. I did the reset and it worked just fine. However, the time is off by like 15 mins. You wouldn't happen to know how to fix that?

Rob Huffman Mon, 03/10/2008 - 13:16
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Ashley,


If the time on the server is correct, these phones should get the updated time at 2:00AM or when a call is made to/from them.


Hope this helps!

Rob


Rob Huffman Mon, 03/10/2008 - 13:17
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Ashley,


If the time on the server is correct, these phones should get the updated time at 2:00AM or when a call is made to/from them.


Hope this helps!

Rob


Actions

This Discussion