03-10-2008 06:54 AM - edited 03-15-2019 09:20 AM
Using CallManager 4.2 and the time on some of the phones adjusted with Daylight savings and some didn't. I applied the needed DST updates before the last Daylight savings change. Any ideas? Is there a way I can change it manually. I know you can on the some of the older phones.
03-10-2008 07:26 AM
Hi Ashley,
If the phone models that didn't change properly are 3rd generation models like the 7941 and 7961 you should be able to do a "Reset" from CCM Admin and have them pickup the proper time.
Hope this helps!
Rob
03-10-2008 12:37 PM
We are using the 7941 series. I did the reset and it worked just fine. However, the time is off by like 15 mins. You wouldn't happen to know how to fix that?
03-10-2008 01:16 PM
Hi Ashley,
If the time on the server is correct, these phones should get the updated time at 2:00AM or when a call is made to/from them.
Hope this helps!
Rob
03-10-2008 01:17 PM
Hi Ashley,
If the time on the server is correct, these phones should get the updated time at 2:00AM or when a call is made to/from them.
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide