Buy or Renew
Buy or Renew
Cisco Virtual Engineer generative AI bot now active in Wireless Discussion Forum. Learn more.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
480
Views
0
Helpful
3
Replies

Need help with WLC 4400 Setup

Go to solution
jameshart1
Level 1
Level 1

‎03-10-2008 09:37 AM - edited ‎07-03-2021 03:31 PM

I have a client that is currently running 2 seperate WLANs. One is configured with 10 LWAPs connected back to a WLC 4400 using MAC Authentication. The other is 2 stand-alone 1200 Series APs configured with RADIUS to a MS IAS server.

The client would like to combine the seperate WLANs into 1; Effectively bringing all APs into the WLC, configuring RADIUS for all, and keeping the 2 current seperate SSIDs.

Is this possible using the 4400 Series? If so, Could you please direct me towards the guides for this setup.

1. Convert 1200 Series APs to LWAPs

2. Configure RADIUS on WLC 4400

3. Configure 2 seperate SSIDS on 1 WLC both using the same auth method

4. Modify RADIUS policys on MS Windows 2003 IAS if need be

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
sabhasin
Cisco Employee
Cisco Employee

‎03-10-2008 09:57 AM

1. Convert 1200 Series APs to LWAPs

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html

2. Configure RADIUS on WLC 4400

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808e5d6b.shtml

3. Configure 2 seperate SSIDS on 1 WLC both using the same auth method

> This should be fairly simple...

4. Modify RADIUS policys on MS Windows 2003 IAS if need be

There are several IAS configuration examples here:

http://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html

View solution in original post

0 Helpful
3 Replies 3

Go to solution
sabhasin
Cisco Employee
Cisco Employee

‎03-10-2008 09:57 AM

1. Convert 1200 Series APs to LWAPs

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html

2. Configure RADIUS on WLC 4400

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808e5d6b.shtml

3. Configure 2 seperate SSIDS on 1 WLC both using the same auth method

> This should be fairly simple...

4. Modify RADIUS policys on MS Windows 2003 IAS if need be

There are several IAS configuration examples here:

http://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html

0 Helpful

Go to solution
jameshart1
Level 1
Level 1
In response to sabhasin

‎03-10-2008 10:05 AM

thank you sir; these look like what im looking for

0 Helpful

Go to solution
sabhasin
Cisco Employee
Cisco Employee
In response to jameshart1

‎03-10-2008 10:12 AM

no worries. glad it helped. don't forget to rate any helpful posts :)

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card