faxes fail inbound

Unanswered Question
Mar 10th, 2008

i am able to send faxes outbound but inbound from the pstn fail. i can hear the fax machine recieving the call , but

there is only one negotiation and it stops here is the mgcp config. wondering if i am missing something....

ccm-manager fallback-mgcp

ccm-manager redundant-host

ccm-manager mgcp

no ccm-manager fax protocol cisco

ccm-manager music-on-hold

ccm-manager config server

ccm-manager config



mgcp call-agent 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

mgcp package-capability pre-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax rate 14400

mgcp fax t38 inhibit

mgcp fax t38 gateway force

mgcp rtp payload-type g726r16 static

mgcp bind control source-interface Loopback0

mgcp bind media source-interface Loopback0


mgcp profile default

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
hadbou Fri, 03/14/2008 - 11:06

It looks like cable problem, paste debug ccapi inout, sh run and sh ver


This Discussion