cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
390
Views
0
Helpful
4
Replies

CME 7941G and cached configurations?

cschear
Level 1
Level 1

I had been having issues with making "url idle" changes to my configuration, resetting phones, and them not obtaining this configuration. I must have made the config change a couple dozen times. At some point, they 3 phones I have in my lab received the config change but when I removed it from my Unity installation, they KEPT loading the "url idle" long after it was no longer in my running or start-up configuration.

I rebooted the CME router. While the router was down I physically powered cycled the phones. Once everything was back up, the phones STILL had the "url idle" values configured! While in the SETTINGS of a particular phone, I typed *,*,#,*,* to unlock and choose "Erase" on the HTTP Configuration option. This removed all the entries, but now I can't get them to populate again with the fields I actually desire: Directory, Services, Authentication, etc.

I'm at a loss why my GUI and CLI changes to my "url" paramters are "sticking" on the phones, and not being downloaded to the phones upon a reset.

Thoughts?

4 Replies 4

paolo bevilacqua
Hall of Fame
Hall of Fame

May be an IOS and phone FW issue. State which IOS you have, which phones and which FW currently.

No FW. Output of "show version" below.

rt-cme#show ver

Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(15)T3, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Thu 24-Jan-08 16:38 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

rt-cme uptime is 37 minutes

System returned to ROM by reload at 13:33:00 CST Mon Mar 10 2008

System restarted at 13:34:46 CST Mon Mar 10 2008

System image file is "flash:c2801-spservicesk9-mz.124-15.T3.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 2801 (revision 7.0) with 236544K/25600K bytes of memory.

Processor board ID FTX1205Z00L

2 FastEthernet interfaces

1 terminal line

2 Voice FXO interfaces

1 DSP, 8 Voice resources

1 cisco service engine(s)

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Forgot the phones...

All 3 are 7941G phones:

App Load ID Jar41sccp.8-2-2ES1.sbn

Boot Load ID 7941G_64-02070631Amd64megRel.bin

Version SCCP41.8-2-2SR1S

Hardware Revision 1.0

8.2(2)SR4S is available for the phones. Beside that, more conservative would be running 12.4(11)XJ4 that still has more bug fixes that 12.4(15)T3.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: