DHCP Snooping and IP Source Guard

Unanswered Question
Mar 11th, 2008
User Badges:

Hi. I need to configure DHCP snooping and IP source guard, but the DHCP server is not directly connected to the access layer, and is actually seperated by a layer three boundary.


The Topology is very simple


ACCESS LAYER > Routed Connection > SERVER SWITCH.


Can i still use DHCP snooping and if so where would it be configured?


Thanks in advance




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Tue, 03/11/2008 - 10:37
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Can i still use DHCP snooping and if so where would it be configured?


You should configure DHCP snooping in all switches in your network. The switchports facing the DHCP servers and other switches should be trusted switchports while all other switchports should be configured as untrusted.


Please see this link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_37_se/configuration/guide/swdhcp82.html#wp1078853


HTH,


__


Edison.

Actions

This Discussion