Callback with a USR modem

Unanswered Question
Mar 11th, 2008
User Badges:

Ok I have a USR modem plugged into the fax line as well as a 2811 router. Aux line was configured with:

1. rtr-1(config)#line 65

2. rtr-1(config-line)#modem inout

3. rtr-1(config-line)#speed 115200

4. rtr-1(config-line)#transport input all

5. rtr-1(config-line)#flowcontrol hardware

6. rtr-1(config-line)#login

7. rtr-1(config-line)#password cisco


4. Use the reverse telnet method on the modem to configure the appropriate initialization string.

rtr-1#Telnet 172.22.53.145 2065

at&f1s0=1

at&w

Ctrl-Shift-6 x

rtr-1#disconnect 1

Closing connection to 172.22.53.145 [confirm]


Then using procomm to call the modem from my pc. Enter the username and pw. But after that I am lost as to what I need to do to enable callback. Anyone have experience doing this before?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion