Per-VRF TACACS config gets "Address already in use" error

Unanswered Question
Mar 11th, 2008
User Badges:

I have created a per-VRF TACACS config on a couple of network devices. I can ping the ACS servers through the VRF. TACACS makes the attempt to contact the servers, but the following message shows up in the log when I debug TACACS:

*Mar 11 08:57:38 starts: TAC+: Opening TCP/IP to x.x.x.x/49 timeout=5

*Mar 11 08:57:38 starts: TAC+: TCP/IP open to x.x.x.x/49 failed -- Address already in use

I can't find anything on CCO that references the "Address already in use" message.

Has anyone run into this?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
g-hopkinson Wed, 03/26/2008 - 07:03
User Badges:


I have a similar issue, but the server group configuartion also goes missing. This is on a 6500 running 12.2.33SXH. Did your server group go missing from the running config?


g-hopkinson Thu, 03/27/2008 - 02:31
User Badges:


Saw the bug, we get address in use message, but that seems to be due to the aaa group missing.

artegall1 Mon, 04/14/2008 - 09:04
User Badges:

That is very good news; I will give it a shot. Thanks for the post.


This Discussion