X2 on 4500 Supervisor V-10GE

Unanswered Question
Mar 11th, 2008
User Badges:

We have Supervisor V-10GE and I am looking to purchase the correct kit to connect using the 10Gb interfaces.

The 2 switches I am connecting are next to each other and I think that the following interface is correct.


But I am not sure what cable I need to purchase? Could someone please advise?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
andrew.burns Tue, 03/11/2008 - 09:55
User Badges:
  • Gold, 750 points or more


You can buy a connecting cable from Cisco, part numbers (starting CAB-INF) at the bottom of the page here:


Although this is probably the cheapest option the distance is limited to a max of 15m so if you think you might move them further apart than this then maybe a fibre connection would be a better investment.

HTH - plz rate useful posts (not just mine!)


mikedelafield Wed, 03/12/2008 - 05:47
User Badges:

Thanks for the cable advice.

Just one further question...

Each port provides 10Gb; would it be also possible to Etherchannel this connection if required?

andrew.burns Wed, 03/12/2008 - 06:46
User Badges:
  • Gold, 750 points or more

There should be no problem with using both 10GE links in a channel, although there is a probably a minimum IOS version required.




This Discussion