03-11-2008 11:13 AM - edited 03-05-2019 09:41 PM
Folks,
After I added the 3rd 3750E to my stack on Sunday I can no longer save my configs with 'copy run start' or 'write mem':
#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
nv_done: unable to open "flash:/config.text.new"
nv_done: unable to open "flash:/private-config.text.new"
nv_done: unable to open "flash:/multiple-fs.new"[OK]
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 54 WS-C3750E-48TD 12.2(40)SE C3750E-UNIVERSALK9-M
2 54 WS-C3750E-48TD 12.2(40)SE C3750E-UNIVERSALK9-M
3 54 WS-C3750E-48TD 12.2(40)SE C3750E-UNIVERSALK9-M
my flash seems to have plenty of space:
57409536 bytes total (24203776 bytes free)
Has anyone seen this?
Ben
01-28-2011 07:21 AM
I get exactly the same issue, did you manage to fix in the end?
P.
08-22-2012 10:04 AM
Sounds like CSCsq24610
01-30-2011 09:50 AM
if you have not started to use the switch that you have added and are able to release it from the stack it might be a good idea to do that and start it up single and run the fsch command (found in boot loader mode in 12.2.40 I think)
and also test the stack without the "offender" that the stack actualy works when the latest switch in it is removed.
good luck
HTH
08-22-2012 10:36 AM
Hi mrbenconrad,
What version of IOS are you runnning?
Here is a bug I have dealt with before:
CSCsc41813
A switch running Cisco IOS Release 12.2(25)SED might reload or display error messages when the user attempts to access the flash filesystem. This might occur when using the dir or copy commands on the flash filesystem, or changing boot configurations, such as boot system filename
To avoid this problem, you can upgrade the switch software
Regards
Please rate if it helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: