03-11-2008 03:18 PM
I am trying to get Campus Manager to use snmp v3 on 3750 but it appears that CM is not able to query snmp v3 contexted mib data (dot1dBridge). I have read all related posts that I could find but I'm obviously missing something somewhere.
3750 is running 12.2(35)SE2
snmpv3 config:
snmp-server engineID local xxxxxxxxx
snmp-server group v3group v3 auth access 2
snmp-server user v3user v3group auth sha yyyyyy
snmp-server group v3group auth context vlan-154
snmp-server group v3group v3 auth write v1default
snmp v3 non-context queries using SNMP WALK work fine and when I configure snmp v2 community I can also use v2 indexed walks successfully. However when I do a v3 context walk I get this error:
The following is a SNMP walk of device 10.3.154.4 starting from dot1dBridge.dot1dStp.dot1dStpPortTable
SNMP Walk Output
--------------------------------------------------------------------------------
dot1dBridge.dot1dStp.dot1dStpPortTable
BRIDGE-MIB::dot1dStpPortTable = No Such Object available on this agent at this OID
If anyone has some insight it would be greatly appreciated.
Thank you....William
03-11-2008 05:10 PM
The context config looks wrong, but that may be a typo. It should be:
snmp-server group v3group v3 auth context vlan-154
The object you want to walk in this context is dot1dTpFdbTable (or .1.3.6.1.2.1.17.4.3).
03-12-2008 10:42 AM
Thank you for responding, Joe.
Sorry, the context config was a typo.
I've now verified the snmp v3 context functionality on the 3750 with a third-party mib browser so I'm left with something not working/configured right in LMS. My next step is to compare network traces from LMS' SNMP WALK tool and the third party browser.
Thx...William
03-12-2008 10:49 AM
I tested the SNMP Walk tool using Common Services 3.0.6, and it worked for me. If you have CS 3.0.6, enable debugging, then post the specified debug log.
03-12-2008 12:40 PM
Here's the debug log. I'm noticing that the context isn't included in the arguments list and I've tried to issue the command from the command line but all I get back is a repeat of the OID, like this:
D:\program files\CSCOpx\objects\jt\bin>snmpwalk -v3 -l authNoPriv -n vlan-154 -a SHA -A xxxxxxx -e xxxxxxx -u CiscoWorks -Iu -r 5 -t 10 -d -m ALL
-M ..\jt\mibs nlwes2 dot1dTpFdbTable
dot1dTpFdbTable: (dot1dTpFdbTable)
Thx....William
03-12-2008 12:55 PM
I found a bug. I'm working on a patch now.
03-12-2008 01:18 PM
Okay, I have a working patch. You need to open a TAC service request to get it. Reference this Netpro thread, and have your engineer contact me directly to get the patch.
03-18-2008 08:11 AM
Thank you, Joe - SNMP WALK now works correctly for v3 context mib data. I will move on with my original problem of getting Campus Manager to discover correctly.
....William
06-08-2017 10:08 AM
Joe, I am experiencing this exact same issue with a 2960x. I have pushed the config out to other switches in the campus and I can walk them just fine without defining a context but when I define a context the walk times out.
Any ideas?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: